一氧化碳分析仪

310K便携式一氧化碳烟气分析仪，手提箱（K）外壳
The Nova 310 Series Portable Flue Gas CO Analyzer utilizes a reliable, customer-replaceable electrochemical sensor which responds quickly to the CO present in the flue gas sample. Its life expectancy is between 3 and 4 years.

In operation, a built-in sample pump draws in the flue gas sample through the S.S. probe, 12ft sample house, condensate removal filter, secondary filter and flow meter then on to the CO detector. The detected CO is displayed on an LCD digital meter which has a switchable backlight for use in dark areas. A dual range switch allows either the 0-2000 PPM or the 0-4.00% range to be displayed.

A rechargeable battery provides enough power to the pump and electronics for about 20 hours of continuous operation. The analyzer can still be operated while it is being charged. A red LED light on the front panel indicates when to recharge. A green LED lights indicates when the charge is complete. The analyzer is supplied with a 12 ft. (4 m) sample hose and a S.S. probe.

310WP便携式一氧化碳烟气分析仪，防水（WP）外壳
The Nova 310 Series Portable Flue Gas CO Analyzer utilizes a reliable, customer-replaceable electrochemical sensor which responds quickly to the CO present in the flue gas sample. Its life expectancy is between 3 and 4 years.

In operation, a built-in sample pump draws in the flue gas sample through the S.S. probe, 12ft sample house, condensate removal filter, secondary filter and flow meter then on to the CO detector. The detected CO is displayed on an LCD digital meter which has a switchable backlight for use in dark areas. A dual range switch allows either the 0-2000 PPM or the 0-4.00% range to be displayed.

A rechargeable battery provides enough power to the pump and electronics for about 20 hours of continuous operation. The analyzer can still be operated while it is being charged. A red LED light on the front panel indicates when to recharge. A green LED lights indicates when the charge is complete. The analyzer is supplied with a 12 ft. (4 m) sample hose and S.S. probe.

481D2一氧化碳连续过程分析仪，红外探测器-481系列
The Nova 481 Series CO analyzers utilize a simple and reliable microprocessor-based non-dispersive infrared detector specific to CO. The detector pulses an infrared beam of light through the sample tube, without the need for a mechanical chopper. In operation, the internal sample pump draws the sample gas through the filter/condensate trap, secondary filter, flowmeter, and then on to the infrared detector. The detector output is digitally linearized and then displayed as percent or PPM CO on the digital meter. The output is also available as an analog or digital signal.

481PMN7一氧化碳连续过程分析仪，红外探测器，壁挂式，NEMA7传感器外壳，面板安装式控制柜（两个独立的机柜）
The Nova 481 Series CO analyzers utilize a simple and reliable microprocessor-based non-dispersive infrared detector specific to CO. The detector pulses an infrared beam of light through the sample tube, without the need for a mechanical chopper. In operation, the internal sample pump draws the sample gas through the filter/condensate trap, secondary filter, flowmeter, and then on to the infrared detector. The detector output is digitally linearized and then displayed as percent or PPM CO on the digital meter. The output is also available as an analog or digital signal.

481N7MC一氧化碳连续过程分析仪，红外探测器，壁挂式，防护NEMA7 UL/ CSA，非侵入式磁校准，防爆Class1，Div1，Group B，C，D
The Nova 481 Series CO analyzers utilize a simple and reliable microprocessor-based non-dispersive infrared detector specific to CO. The detector pulses an infrared beam of light through the sample tube, without the need for a mechanical chopper. In operation, the internal sample pump draws the sample gas through the filter/condensate trap, secondary filter, flowmeter, and then on to the infrared detector. The detector output is digitally linearized and then displayed as percent or PPM CO on the digital meter. The output is also available as an analog or digital signal.

481RM一氧化碳连续过程分析仪，红外探测器，19英寸（483毫米）支架式安装在滑轨上
The Nova 481 Series CO analyzers utilize a simple and reliable microprocessor-based non-dispersive infrared detector specific to CO. The detector pulses an infrared beam of light through the sample tube, without the need for a mechanical chopper. In operation, the internal sample pump draws the sample gas through the filter/condensate trap, secondary filter, flowmeter, and then on to the infrared detector. The detector output is digitally linearized and then displayed as percent or PPM CO on the digital meter. The output is also available as an analog or digital signal.